Epoxy floor coating to seal a solid floor, which does not have a damp proof membrane.
Timber Resin Sructural repairs to decayed ends of large timber Bressummer beams, trusses etc.
Moisture Sensor installation to remotely monitor the drying out of areas. The sensor is installed in a vulnerable place and wired back to an data output point were a moisture meter can be plugged in to download readings. The number and location of the sensors will depend on whether they are for monitoring a current problem or for future building maintenance.
Dry rot sensors can detect the start of an outbreak or it limits. They are a 7 mm timber dowel which has been coated with a reaction agent which changes colour when it comes into contact with active dry rot. It can also be used to monitor drying out of masonry (combined with a moisture meter).
Monitoring air born moisture this is done by installing a relative humidity, thermometer sensor data logger. This is non-destructive and the data will show RH, Temp and dew point over a long period of time as numerous readings are take (up to 7,900). This will give a graphical profile of the air born moisture movement in a property, allowing the specification of remedial action to help control the situation, or monitor the building environment.