Summary of Services

ü Chemical Damp Proof Course to control rising damp in masonry walls.

ü Electro osmotic damp proofing to control rising damp in masonry walls.

ü Structural Waterproofing to prevent or control lateral penetration of ground water using a coating or a Cavity Drain Membrane to hold the moisture in the capillaries or drain the moisture, depending on situation.

ü Epoxy floor coating to seal a solid floor, which does not have a damp proof membrane.

ü Dry and wet rot treatment using Boron based preservative.

ü Misting voids with a Micro-spray unit which are not accessible or where lots of floorboards cannot be lifted for normal spray work.

ü Spray floors and voids with macro emulsion, which allows access after 1 to 8 hours depending on formulation.

ü Epoxy Resin structural repairs to decayed ends of large timber beams, trusses etc.

ü Moisture Sensor installation to monitor the drying out of areas.

ü Dry rot sensors which can detect the start of an outbreak or it limits.

ü Monitoring air born moisture and temperature this is done by installing a relative humidity, thermometer sensor data logger. this is non-destructive and the data will show RH, Temp and dew point over a long period of time as numerous readings are take (up to 7,900). This will give a graphical profile of the moisture movement in a property, allowing the specification of remedial action to help control the situation, and monitor the remedial action.